looking for lowering springs

hey im looking for lowering springs for a reg cab short bed truck that will work with my 04 silverado. looking for 1 or 2" drop springs. so let me know if you have a set. not looking to spend a arm and a leg, thanks guys~~kyle

Front springs can be cut with an abrasive cutoff wheel to lower the truck if you have coils.

but hows the ride?? thats what my uncle told me to do, im doing hangers as soon as they come in(this week) and said we could get a perfect measurment of the diffrence then cut the springs. instead of paying for them. please let me know

My truck rode much nicer after cutting the springs. I cut the bottom of the spring 1 full turn and it was about 2" drop on my truck. I'd cut 1/2 of a coil and see how you like it and you can always cut a little more off if you want more.

thanks, what truck did you do this to?? also cut from the bottom , not the top??

I did it to the red 92 in the signature, not the maroon one which has 2" belltech spindles. The red one had McGaughy's spindles on it.

<div class='quotetop'>QUOTE(04silveradoclone07ss &#064; Apr 29 2007, 08&#58;55 PM) [snapback]91772[/snapback]</div>

Quote:

---

thanks, what truck did you do this to?? also cut from the bottom , not the top??
[/b]

---

I cut my springs from the bottom....I think you want to cut from the top....the angle on the a arm perch makes alot of noise,so I turned mine over

anyone???


bump for the day.

hangers suck to install, .. i didnt cut my springs but i wish i would have after spending &#036;90 on them ..good luck

i have 3 inch springs for sale 75.00