Where do you mount the MAF sensor when you install a FMIC? I know there is going to be a pressure drop going through the IC, so do I have to adjust my boost controller if I want 8 psi?
Printable View
Where do you mount the MAF sensor when you install a FMIC? I know there is going to be a pressure drop going through the IC, so do I have to adjust my boost controller if I want 8 psi?
It will work best as close to the TB as you can. If you have a MAF then before the MAF.
<div class='quotetop'>QUOTE(GMCwantsLS1 @ Apr 17 2007, 09:17 PM) [snapback]90297[/snapback]</div>So I can just relocate my MAF sensor to the piping after the IC? Just trying to understand. :bash:Quote:
It will work best as close to the TB as you can. If you have a MAF then before the MAF.
[/b]
<div class='quotetop'>QUOTE(ramair2002 @ Apr 18 2007, 11:57 AM) [snapback]90393[/snapback]</div>Yes! Sorry I meant if you have a blow off valve put that before the MAF. You will want to read the boost for the wastegate or boost controler from the intake manafold.Quote:
So I can just relocate my MAF sensor to the piping after the IC? Just trying to understand. :bash:
[/b]