+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: engine startup and no oil pressure... NEED HELP!!!

  1. #11
    Join Date
    Nov 2011
    Location
    NH
    Posts
    109
    so i think i figured it out guys. when i put the double roller timing chain set on it moved the oil pump out a bout a 1/8 to 1/4 inch. and the oil pickup got moved just enough so that it set a little sideways and was breaking the seal. so i pulled it all off and am putting the stock one back in to see if it fixes the problem. but i want to run the double roller setup so what do i have to do?? pull the whole engine to get to the pickup to bed it enough to lineup??

  2. #12
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,689
    you need to slot the mounting points on the pickup tube so that it moves forward to meet the new mounting hole location.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts