+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 40

Thread: Stunna's Garage

  1. #1
    Join Date
    Jan 2008
    Posts
    8,203

    Cool Stunna's Garage

    WELL HERE SOME PICSOF MY 2008 SILVERADO AND ITS PROGRESS...

    BOUGHT BRAND NEW IN 07'

    IT'S JUST A WORK TRUCK




    WELL AS WE KNOW,STOCK SUCKS...

    SO I DEBADGED IT,CLEARED THE LIGHTS,AND GAVE IT A 4/7 MCAUGHYS DROP ON 05'17'S



    SS BUMPER COVER WAS ADDED ALONG WITH CHROME INSERTS


    ADDED REAR SS ROLLPAN


    HERE I SMOKED THE TAILS,,ADDED SIDE EXHAUST


    AND 20' CENTERLINE STINGRAYS



    THEN HERE I ADDED 20'SS WHEELS,PAINTED SILVER STRIPE,RST WING.





    AS FOR POWER ITS JUST A BABY 4.8,,BUT IVE FROM A..

    Z06 CAM AND MAGNACHARGER..
    http://www.youtube.com/watch?v=SoYmhqonQmE

    ALSO THUMPER CAM
    http://www.youtube.com/watch?v=NeQ0jk-7Uzc


    NOW IT IS STOCK HAHA

    WELL NOW IM BACK TO THE COSMETICS...I GOT TIRED OF THE SS LOOK AND WANTED SUMTHIN MORE PIMP

    INTERIOR FIRST...DASH TAKEN OFF


    DASH PAINTED VIPER BLUE...



    EXTERIOR AS IT SITS NOW...






    ILL HAVE THE COMPLETE LOOK DONE REAL SOON...

    FUTURE PLANS:
    COMPLETE EXTERIOR/PAINT
    NELSON FRONT MOUNT TURBO SETUP
    22-24' WHEELS
    BEDRUG/LID

    THANKS FOR LOOKING...

  2. #2
    Join Date
    Jan 2008
    Posts
    8,203
    ok getting some more progress done...

    got the radiator support on ,,inner fenders painted and installed.added some sport mirrors as well



    also got my door panels back from my painter..




    post up some more progress soon...

  3. #3
    Join Date
    Jan 2008
    Posts
    8,203
    wow havent updated in a while....well heres alil upgrade i did a while back...upgraded thr front clip to the "Platinum" edition





    then did a dual Xr1 Borla exhaust



    now to put some weight at the rear ,im going to be removing the oem tank and replacing with a fuel cell at the rear of the truck....


  4. #4
    Join Date
    Dec 2006
    Posts
    4,127
    youre pockets are toooooo deep!! but all bs aside it looks really good
    Simple: 408 on steroids!
    single digits coming soon!

  5. #5
    Join Date
    Aug 2008
    Location
    mansfield texas
    Posts
    3,520
    Quote Originally Posted by CHEVROLADE View Post
    now to put some weight at the rear ,im going to be removing the oem tank and replacing with a fuel cell at the rear of the truck....

    Now this is what im talkin bout!

  6. #6
    Join Date
    Jan 2008
    Posts
    8,203
    lol...got the cell frame mount done....just now need to get sumthin fabbed up to hold the oem pump in,,,extend lines and harness and call it done



  7. #7
    Join Date
    Dec 2006
    Posts
    4,127
    isnt that flat bar gonna be in the way of the bed laying flat on frame?

    you could use your oem bucket but would need to modify the tank fiill hole.
    Simple: 408 on steroids!
    single digits coming soon!

  8. #8
    Join Date
    Jan 2008
    Posts
    8,203
    Quote Originally Posted by skeet View Post
    isnt that flat bar gonna be in the way of the bed laying flat on frame?

    you could use your oem bucket but would need to modify the tank fiill hole.
    no i made sure of that..bed sits up on its rails,has some nice clearance....

    u mean modify the tank fill hole on the fuel cell or? i was thinking just fab up one out of aluminum ...but where the heck do they sell thick aluminum....cant weld steel to aluminum rite?thats all thats left ,then extend lines and harness then done

  9. #9
    Join Date
    Dec 2006
    Posts
    4,127
    i fugred you checked zach but i wasnt sure how flat the bed actually sat on frame, good thinking

    you plan on running a hose to the fuel door on driverside? if so swap the tank around, but it still probably wont work, will not fill properly.. modify the filler hole on tank, im sure it you asked Jon he probably could cut you one out then you would just need someone to weld it on.. correct on steel to aluminum and vice versa.
    Simple: 408 on steroids!
    single digits coming soon!

  10. #10
    Join Date
    Jan 2008
    Posts
    8,203
    Quote Originally Posted by skeet View Post
    i fugred you checked zach but i wasnt sure how flat the bed actually sat on frame, good thinking

    you plan on running a hose to the fuel door on driverside? if so swap the tank around, but it still probably wont work, will not fill properly.. modify the filler hole on tank, im sure it you asked Jon he probably could cut you one out then you would just need someone to weld it on.. correct on steel to aluminum and vice versa.
    not sure if hes done a NBS..these pumps looks wider than the obs....im just going to cut a hole in the bed and go straight up like yours

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts