Reply With Quote3/8" and should have cost $5 not $10.
tried to take the line off today so i could change my injectors out, bought a cheap set of those quick release tools at advance, like ten bucks. but that thing will not let go. any body have a pic of the one i need and size. my truck is returnless style, thanx nick
Master power t-76 kbracing, Intercooled, 7psi, tr220 cam, patriot dual springs, 42lbrs, walbro, efans, 80e, tansgo, yank 3200.
3/8" and should have cost $5 not $10.
it was the plastic colored set that has like 6 different ones in it, and yeah it was $10 not $5
Oh...the set. The metal two-sided one is better if you only have one application.....and it's cheaper. Should be able to use the 3/8" size, put it on the line, lightly engage it into the quick connect, push the hose TOGETHER, push the tool in, pull the lines apart.
Some of that sounds dirty and while we're at it, sometimes you have to twist it real good to work...
thanx gas, i found the one your talking about on autozones web site, gonna go get it tommorow so i can get that bad boy off.
yeah you use the light blue one i believe...but do just like nathan said push the line further on then push the tool inside the line and pull the line off while pushing the lock....some of them are on there pretty good so pull the hell out of it!
Where There's a Pill There's a Way!"
+1
Try the DMax ones...they're bigger and harder LOL
be sure to bleed the pressure off first, or it might get you in the eye...
stockish 6.0 on some dopeBDD cam coming soon
Wow guys...REALLY?????
2000 ECSB 5.3L
228R CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 60e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
