+ Reply to Thread
Results 1 to 3 of 3

Thread: Conversion exhaust

  1. #1

    Conversion exhaust

    I have a 5.3L with 4l60e trans from an '05 silverado going in my '96 GMC Sierra.

    The new engine has the exhaust manifolds and about 6" of the pipe behind the flange. Can I use my stock y pipe?

    Will my drive shaft work with this?

  2. #2
    Join Date
    Dec 2004
    San Antonio, TX Area
    The driveshaft will work. No on the y-pipe. Schoenfeld headers.
    "ALisSa1 Silverado"
    1990 Chevrolet RCSB 2002 Chevrolet Camaro LS1/4L60E
    Scrimpin Ain't Easy
    ( . Y . )

  3. #3
    If you have the 5.3 Y-pipe,you can cut,fabricate and weld it to mate up with your 95 exhaust,I wouldn't recommend it unless you are familiar with that kind of work,or have a good muffler shop nearby.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts