Reply With Quote
Part number for oil pan oil cooler bypass/block off plate... http://www.ls1truck.com/forums/104117-post8.html
Here is an update on the conectors for the fuel filter as far as the price:
Dorman Fuel Lines DOR-800-121 Dorman Fuel Line Connectors, Retainers & Repair Kit For 3/8 hose and line 1 $9.99 $9.99
Dorman Fuel Lines DOR-800-120 Dorman Fuel Line Connectors, Retainers & Repair Kit For 5/16 hose and line 1 $9.99 $9.99
Dorman Fuel Lines DOR-800-155 Dorman Fuel Line Connectors, Retainers & Repair Kit 12"x3/8 1 $12.99 $12.99
Part number for oil pan oil cooler bypass/block off plate... http://www.ls1truck.com/forums/104117-post8.html
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Just found this... all the parts you need to complete an LS engine from the covers to bolts and sensors.... PN 19153789 Check it out at CrateEngineDepot.com
19153789 Bare Block Completion Kit, Gen III
Includes all parts to complete a Gen III bare block The kit includes:
01-12575742 Valley Cover
01-12561211 Cam Sensor
08-11515756 Bolt
01-12570471 Valley Cover
01-12561243 Front Cover
08-11515758 Bolt
01-12614813 Rear Crankshaft Seal Housing
12-12556127 Bolt
01-89060436 Rear Crankshaft Oil Seal
01-12574293 Rear Crankshaft Seal Housing Gasket
01-12573460 Oil Galley Plug
02-11588949 Oil Plug
04-09427693 Water Drain Plug
02-01453658 Transmission Alignment Dowel
01-12561663 Water Drain Plug
01-12556437 Camshaft Retainer Plate
Last edited by RedHeartbeat; 10-15-2007 at 09:24 AM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Originally Posted by farmtruc
Standard motor p/n SG273
1991 c1500. 5.3l and 4l60e swap in progress, next paint and body.
I have a set of service manuels for all 2001 chevy truck, tahoe, and sub if yall need some part number just give me the part u r looking for and i can look it up i have 5 manuels that cover every nut and screw
The new PN for for the rear main crankshaft seal only is 89060436
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Oil bypass / blockoff plate that was previously Fbody PN 12553210 is now PN 12577903. The seal to fit the plate is PN 12553210.FWIW, this new replacement plate does not have the provisions for tapping for a fitting. The boss that stuck out the side is no longer there.
Last edited by RedHeartbeat; 11-20-2008 at 08:25 AM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Part number for throttle cable bracket when using the truck intake is
pn 89017380. comes with screws but if you are converting from dbw you may need to make yourself some inserts for the bolts. I used a fine thread 7/16 bolt and drilled and tapped for 6mm fine thread(original size), carefully drilled and tapped the bosses in the intake and lightly siliconed and screwed inserts in place. worked like a charm.
Dump question, where are these part numbers from? GM?
unless specified most of these are gm part numbers that can be used to order from a dealer or many places online includings scoggin dickey and gmpartsdirect. otherwise they could be dorman or a company like that, but most places crossreference between brands.
Posting Permissions
