Reply With QuoteWow nobody has any help to offer?
Ok I am finally getting around to cleaning up the wiring and other loose ends and need to get the port hooked up so I can pull codes and tune with HP how many wires need hooking up and can someone help me out with pin #'s or such. I have a schematic of the c100 but have now clue which wires I need out of the computer.
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
Wow nobody has any help to offer?
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
What year is your truck?
My truck is an '97 donor 5.3 is a 2002 supposedly. Really surprised I am having this much trouble getting this info I wanted to know how hard it would be to hook up the towhaul option too if someone knows that one...
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
Here are the pins I found on the ECM that pertain to the check engine and programming.
58
DK GRN
1049
ECM/PCM/VCM Class 2 Serial Data
59
YEL
710
Class 2 Serial Data
14
ORN/BLK
1061
UART Serial Data [Secondary]
15
DRK BLU/WHT
774
UART Serial Data [Tertiary]
And here is what I have from the C100
B6 Check Engine Light
B7 Serial Data Class 2
If I had to guess I would say that Pin59-->B7 but I don't know which pin the dummy light should hook to. Am I right wrong some one point me some direction so I can get something done while I am waiting on my transmission...
Last edited by aarolar; 12-07-2009 at 08:04 PM.
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
Posting Permissions
