Engine | Transmission | Chassis | Fuel
Ok after i got my turbos running i had oil blowing out of both inlets so i knew it was rebuild time. I made a few phone calls and every one wanted...
You can thank cjriojas for creating these. Head Flow Chart Intake Flow Chart
I've been working on bolt in coil-overs for many different applications. This one is for a 99-07 with stock upper and lower control arms. This...
hey guys, Here's a truck, belonging to a forum member, that has gone through a lot of changes. Originally, the truck started it's life as a...
Haven't been able to find information on weather i can run E85 or not on a 2009 GMC sierra 4.8. In HP tunersit does have a section for flex fuel and...
Hey fellow chevy enthusists, I am new to this forum. I have a 2006 5.3L Silverado Z-71 4 x 4 crew cab. My warranty recently ran out and I am looking...
Hello guys, I have done some reading on here and found this is the most informative site so I thought I would join ! I have a 1960 chevy...
The truck cranks (5.3l LM7) have a little bit more of a stroke according to the numbers that i have seen when compared to the LS1 car cranks stroke. ...
Can anyone tell me the difference between the two different 5.3?
Ok, decided to go ahead and turbo the Tahoe. going to start slow, do some preliminary fabbing of the crossover and such and keep it running while...
So as many know ive been planning on tearing down my truck and starting at the frame....again, evrything is getting done, brakes, shocks, drilled...
Was thinking of using a 90mm (actually 88mm) throttle body off a newer 6.0 & 6.2 truck engine with the 4 bolt pattern but my stock intake is for the...
I finally got rid of the Air Ride off the rear and put Ridetech coilovers on it to match the front. I also added a 28 gallon tank to help in between...
I have had my 07 "new body style" silverado 1500 for about a year and a half now and she is bone stock besides dumped 7" in the rear and 6" in the...
Alright i have completely modded the truck out and am now adding a sweet nitrous setup to it and am hoping for mid to low 11's. There is pretty much...
I have a 2002 silverado 5.3 with a comp cam and a dyno tune no cats and duel exaust, cold air intake. the guy that dyno tuned my truck said an SS...
so im new to this and trying to build my motor right. i have a 5,3 with 799 heads. im pulling the motor to put in LQ4 block bored 30 over forged...
What would it do?
Got lucky at a local junkyard and snagged a set of 862 heads off a wrecked z71 2000-2006 body style. thinking about building these (port n polish,...
Figured this would be a good place to start listing and keeping track of what I need/may need to do for the turbo install. If any of you experts...
For the past month I have been building and testing A hydrogen generator. After Lots of ups and downs I have finally finished. I researched different...
so i finally got what i needed to be able to fill my own bottles, so i filled my first one and went to test it all out and heres what happens now......
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules