Engine | Transmission | Chassis | Fuel
Ok guys ive noticed that some guys (including one of my friends with a cummins) are starting to run longbars rather than caltracs. I plan on building...
Im going to be installing a set of P/P 243 heads milled .040 on my stock 5.3l bottom end ,to run while i build the LQ9. Cam is a Lunati voodoo...
ok cats outta the bag.. i just placed an order on a block to build a 408 for the SS. anyone think im gonna need bigger injectors? i got 42lbers in...
I've heard about it, ordered one off of Ebay for $15 shipped and it took me about 45 minutes to install. It definately makes a difference. Now under...
if so what brand? anyone know if F-body headers will work, i have heard that some will and some wont,
Does anyone have one? I'm looking for something LOUD at WOT that has no drone. I don't want to jump on the Magnaflow bandwagon but cannot stand...
Guys, I need a new set of valve seals for my 243 heads. Anyone know the GM part number for these particular seals?
Efans on a yukon good or bad idea?
Just got rid of my favorite short wide bed chevy (2000) for a 09 GMC Sierra 2WD 5.3L. After looking up the vin I found out the engine is a LY5. ...
My pump just went out, so was thinking of adding a better cooler at the same time i replace the pump(better cooling longer life i hope) can anyone...
Ok I am seriously thinking about doing this in the near future. Looking for input from anyone with any experience with this. Basically you wire up...
So i recently upgraded to a 5.7 ls6 in my 2000 silverado with a return style fuel system..i have it rigged with a t fitting in the feed line that...
I cant find any info, nor do i know where to look to see what size ID fuel rails are needed for what HP rating. I am looking at the Edelbrock ones...
I have 04 silverado Z71 with a 5.3 nothing to much done to it. running 33s with 373 gears I am looking into putting a cam in it I don't race with it...
Do the 243 heads respond well to a little hand porting in the bowl area, or are they pretty clean there as cast?
Ok, just recently I looked under my 09 nnbs and saw that there is a unmonitored cat infront of the muffler behind the flange that bolts to the...
Ok guys im gonna be gettin either a lq4 or 9 depending on $ at the end of this month. The ? is, is the 3200 stall (behind my cammed 4.8) gonna be too...
Just wanted to see what you guys think about the cheaTR V.3 cam from TR. The specs are: 219/230 .607/.604 117 LSA It will be going in my 5.3 with...
How many of u guys have one?or run them?do they help out during racing?i just put one on my truck just for sound.to me it runs better closed. Anyone...
I just ran across this sweet looking setup while reading a Truckin Magazine. I have never heard of them before but i don't know of anybody that makes...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules