Engine | Transmission | Chassis | Fuel
Haven't been able to find information on weather i can run E85 or not on a 2009 GMC sierra 4.8. In HP tunersit does have a section for flex fuel and...
So I am in the middle of doing a 6.0 lq4 swap into my 95 k1500 and am looking to do a cam while I have the motor out. It'll be a first as far as...
Hi Guys I have a tech ? I purchased a TCI flex-plate for my truck after i found out that my stock one is cracked. here is a few details on my...
I have a 2013 Sierra with a 4.8L. I have long tube headers ypipe back exhaust as well cold are intake and a tune right now but I want more power I...
Well I made it to the track last fall with my 6.0 obs rcsb truck ran good went 12.30 at 110 current set up is a stock lq4 with shaved .030 243 heads...
Hey everyone. I wasn't sure if this should go in the performance or conversion swap section so if this isn't where it belongs feel free to move it. ...
I keep hearing rumors that the spindle from a NBS (6-lug) can be swapped into an OBS to facilitate bigger brakes on an OBS. Cant seem to run them to...
Hey guys, just picked up a 2010 Sierra with the all aluminum flex fuel 5.3. I'm looking at doing the DOD delete and a cam with supporting mods. My...
Was thinking of using a 90mm (actually 88mm) throttle body off a newer 6.0 & 6.2 truck engine with the 4 bolt pattern but my stock intake is for the...
I bought a used 2003 Denali 6.0L LQ4 from a dismantler. I purchased a new cam from Lingenfelter. I asked them which cam would work well with a...
I'm wanting to build a decent 5.3. I've got the whole top end from a 2000 z28 I.e. heads intake fuel rail and injectors that I've thought about...
well let me give you guys a little back story, my little sister dated a guy all through high school and he had a 2002 ext cab Silverado with a 4.3....
I've been working on bolt in coil-overs for many different applications. This one is for a 99-07 with stock upper and lower control arms. This...
I have a l59 5.3 in a my 04 tahoe. Looking to upgrade the motor some but I'm stuck on what my best option is. I would like to try and us as many LS...
Well im building a k2500 crew cab with a lq4 4l80e. was looking at the comp high lift cam 54-424-11 for my build but my buddy told me he has a ECS...
Hi all, I'm new here. First post actually so if this is in the wrong place I apologize. I have a 95 c/k1500 Cheyenne single cab swb. I've been...
I have a set of hooker long tube headers from a 4 gen camaro does anybody know if they will work on my 01 shortbed 2wd reg cab truck thanks in advance
I have been looking for a street truck forum since I got my new toy. I just bought a 2002 rcsb with a 5.3,3:73 gears and a heavy duty locking rear....
I have a 01 shortbed and want to drop it so question is spindles or coil springs ?what is my best options alignment and tire wear .Im not looking to...
Is the LSA cam a good choice for a 600whp turbo 5.3L motor? I found this guy that has a used 09 Z07 factory cam set and this new LSA cam set for...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules