The best tools for the trade and helpful tips on how to use them.
It seems like people are always trying to find out which gears with what tire heights will work best for their application. Well here is a good link...
For guys, the best tools are duct tape and a hammer! :LOL: Nah j/k guys. Always have your impact available with all standard sockets and...
While changing a solenoid in my transmission a torx style bolt stripped out. To avoid having to drill and tap it out, i cut a slot across the head...
easy way to fill up the engine with coolant,use the upper radiator hose to fill up engine,pull it off radiator,use funnel and fill the engine up,also...
I got these off Amazon. After seeing the twin turbo burn up and a couple of videos of vehicles catch on fire, I figured it would be cheap insurance...
50' of basically new air hose. Campbell Hausfeld 1/2" impact Campbell Hausfeld 3/8" ratchet (long one) Craftsman 3/8" ratchet (short one) ...
Cooler a/c for $1 (and 6 zipties) 99-present - GMFullsize Forums Worth doing!!!:beerchug:
they didnt hide the plans very well.... Run Your Car on Water - Download Page
I am fixing to start cleaning my heads off the 5.3 going in my truck and was wondering what chemicals to use? I have a parts washer and we usually...
I got mine done pretty quickly, but mainly asking this out of my own curiosity. When I was removing the top nut on the front shocks on the drivers...
Looking at this spring compression tool wondering if it worth it or if there is a better or still quality and cheaper one. Here is the...
anyone do anything besides automotive work? i do woodworking and construction and have a bunch of tools for it. Love my table saw :)
I found out the hard way that the 2 are different. The Truck has a hole on the top left if your looking at the butterfly. That's the oil breather....
i need a tap for the crank bolt...the threads in mine are a little bugered up eeping me from tightening the crank pulley all the way down....i just...
ok guys this is my first time mounting an engine to a stand.... i have an 02 ls1 and an Ac Delco engine stand i just got from a friend... what kind...
Summit brand air filters are K&N renamed, may have already known this but I just found out today when mine arrived in the mail...
This helped when looking for the connector to repair part of my harness. | pi | wiring-connectors | ACDelco TechConnect
I want to get a set of racing seats and harnesses for my truck, but I don't know the exact size of the socket or where to get it to remove the seats....
So the transmissions breaks, which means a bunch of out-of-pocket money. I know the whole performance thing takes it's toll on my wife and something...
So as some of you may know I relocated the battery to where the spare tire typically goes. I used a Taylor relocation kit with 1 gauge wire. The...
going to use a -10an for my drain on the turbo, i need help on what size bit and tap to use and where to get it at. I already have the -10an fitting...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules