Powertrain | Body | Chassis
Since my 92 and 93 trucks were modified/updated to the LSx powertrain and the fuel pumps were also updated to Walbro 255 LPH pumps, I decided it was...
Upgrading your fuel pump? Don't forget to upgrade the power supply lead to handle the added amperage load. Higher pressure means higher current loads...
Hey guys... Is there a relay switch or a bypass or anything that would make it where when I turn my brights on my low beams and fog lights dont turn...
The ls1 comes with a two wire temperature sensor. One for signal and the other, I don't know. The LS1 Swap Manual I have has an aftermarket (GM...
Today was very busy, go my shims in and most importantly i rewired my entire harness. The befor and after like night and day. I yanked the old fuse...
Does anyone know of pictures of the LT1 PCM pin out and the LS1 PCM pin out? Thanks
Not too long after I got my truck a friend of mine descreened my MAF saying it would increase power and throtle response, I said ok 'cause I didn't...
I finally got my fans hooked up to the pcm!!! After a long time of dealing with the toggle switch and keeping an eye on the temp gauge in traffic,...
I tried to connect my lt1 fans to my pcm, but I don't know what pins to use. I have a pcm pin readout for my truck but it does not list any pins for...
I recently purchased from ebay a 00 BCM (Body Control Module) for my 99 sierra. I have been told that this swap will clear the airbag light on my...
I need help, I received my LT1 E. Fans yesterday and need help on how to mount them to the radiator. It also didn't come with any connectors to...
I installed a set of Flex-a-lite 290 fans into my 2002 Silverado HD with the 8.1 motor last week. The 282s go into trucks with the smaller radiator...
Found my dad's old mobile CB radio and want to put it in my truck. I think I'm going to mount it right underneath the cigarette lighter, but I don't...
long time no see.......given up on doing a swap for now, just sold my navigator and buying a house soon and then a car so after that i can tear down...
If it isn't broke don't fix it. :bash: My truck with the hyp 3 (that I have had for 3 years) has run 14.02 @96 consistent this season so far....
I want to make my own harness and was curious as to where to buy the parts, i need wiring ( i prefer a rack with all kinds of spools on it), the...
Ok, i finally got my hoses and mechanicals all hooked up ( not the pulley yet, waiting for a belt), so now i'm connecting all the ac wiring stuff. ...
Hey I scored a slightly used 130A alternator for ~$90 shipped. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=2428900118 This will work okay...
Well, something wierd happened today. When I got home form work, after driving all day, my electric fans stayed on after I turned the car off. ...
Well I go to rip the door apart (well 2 bolts and a few plastic panels) and inspected the nasty sounds coming from inside the door. I thought I may...
Well the stock belt won't work, trust me I tired not shell out $22 for the new one but had to. I got a Goodyear belt from "The Zone" LOL. :laugh: ...
Hooking up my guages and have a few questions, I have heard to just splice into the VSS and not run it through the gauge because it gives the...
So yesterday after I packed all my shit to goto Vegas the truck decided she didnt want to start. First time shez ever done that and I was driving...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules