Forum: LSX Truck Conversions

I've been researching doing an LSX conversion for a couple of years now, and since my truck just reached 315,000 miles, I'm getting more serious...

I will be putting an lq9 into my 93 blazer in the next month. I will be running a built 4l60e from a 96 or 97. My question is what do I have to do...

ok so i am in the middle of a 5.3 swap in a 98 gmc c1500 W/T L/B with a 4.3 4l60e swap. i got everything figured out besides the torque converter the...

Swapping 5.3 into my 96 Sierra is Auto Meter 2272 part number to adapt into side of head

title says it all!! I was originally planning on getting a lq4 from efienginesupply.com but it seems he doesn't reply to emails or is maybe out of...

I have a 93 blazer with a 4l60e in it. Will my ls computer control the 4l60e. I read something somewhere about the 93 trans wont work as is.

Well guy's I have a big problem, I have a 95 chevy with an 03 6.0 LQ4 that has 31K miles on it, I installed a TSP 224R cam, hardened 7.4 pushrod's,...

just finishing swapping a 01 5.3/4l60e into my 91 gmc 1/2 ton being a 91 the truck has its drac/vssb built into the cluster (not in a seperate...

What are some of your thoughts guys about using ss hardline and -an compression fittings. I have access to plenty of ss hard line in 3/8 to run for...

Here's my dilema. 04 GMC Sierra Z71, 5.3 with no oil pressure. I'm calling my gut feeling that its an internal issue and not the pump so I need to...

Well my motor is all the way back as far as the dirty dingo mounts let it go and my driveshaft is about two to three inches short from mounting up if...

I need the pinout for the connector on the driver side firewall( the one that bolts to the firewall) thanks guys

Ok so if any of you guys have been keeping up with my build its been a long road. But i have found the easiest way to run the wiring for the ls...

Who all used these mounts I must say they look great out the box till you unload them and bolt them up.I'm wondering why it took me 5 hours to pin my...

I have decided to put a LQ4/9 into my 93 fullsize blazer and have a few questions. Will the new engine mount in the same spot as old so I dont have...

I think I found the engine I am going to buy for my swap. It however is a drive by wire engine and harness. I would be swapping for a drive by cable...

Anyone know of an adapter or anything that will plug the truck harness injector connector into a ls1 fuel injector???

Hello, Got a 95 Sierra and want to install an LM7 into it. Problem is I live in California and have to have all the smog components for the swap....