Forum: LSX Truck Conversions

Question, seems like there's a bunch of 6.0L engines with 2WD 4L80E tranny combo's out there. Can the 2WD 4L80E be converted to 4WD and mate to a...

well i was thinking i would just get a 3/4 of an inch spacer on the bell housing, will that would or do i need an adapter for the torque converter...

:help: i already have my 6.0 lq4, i think i might need a new intake manifold though, but besides for the motor what is about the average that youguys...

I did my swap and ran around for 23 minutes and fried my 60e. rebuilt it and runs fine now I guess converter that I got fromEBAY!!! was just crappy. ...

What are my opitions for a 04 silverado with autotrac. Do I have to get a different transfer case and what are the opitions nv3500 4500 smf6 or could...

My swap (again) is from a 2002 F-body. There is a vacuum line wrapped into the stock harness. It was not hooked to anything at either end. Does...

hello guys- ive got a problem- i purchased a 68 shevy p/u with a 03 5.3 motor and trans from a tahoe- it is installed/runs drives/ problem is it...

Will a 95 or 96 4L60e work on my 2002 6.0L?? what would it take to adapt?? thanks in advance

Guys, my buddy has a stock LQ9 that he's going to swap into his his 2000 in place of his 4.8. He needs to have his PCM tuned for the 6.0 but he...

In 98-02 ls1 exhaust manifolds.. thought i had a set of flanges found but they came off of a 03 c5 vette and would not work.. also looks like...

When hooking the wire from the computer to the ses light does it go to the ground side or the hot side of the bulb. I'm working on a 84 with a 5.3....

This is an awesome site. I've been lurking for a while but I've got a question for all you pro's. I want to swap out my vortec 5.7 in my 99 yukon....

i have a 4.8 automatic in my truck and was woundering if it would be worth swaping a 5 speed in it

well i am assembling all the parts for my swap. I have a 94k1500 4wd. Going from TBI to LS1 anyways i bought a 98 camaro LS1 and 4l60E, i want to...

I picked up a LQ4 today for my own swap. It was out of a truck with a 4l80e. I am going to be running a new style round bellhousing 4l60e, Do I need...

I recently picked up an '03 LS6 from a wrecked vette. Since all Z's were 6 speeds and I would like to go auto, can I get the PCM reprogrammed to...

What is everyone using to mount their computer? No zip ties are not an option :smile: My truck should be coming back from the paint shop this...

i was reading that the LQ9 block is only rated to 500HP, does anyone know what the blocks will actually take or what people are actually getting out...

2007 Reluctor wheel -------------------------------------------------------------------------------- Hi everybody.... I wish that if...

Ran across a complete 6.0 lq motor. CAst iron block. Would that with a good cam and head work be better than my 5.3l with milled LS1 heads? gotta do...