All LS Based Conversions
So, I have a 1994 c1500 with a 5.7 350 tbi, and a 4l60e. I've already taken out my 350, and I was planning on building it, and swapping it to...
Anyone here used the drive by wire in the older truck? Does someone make a mount? Can I use the gas pedal from my donor Yukon? Which wires...
I have read a lot of threads where guys find a truck/car in a boneyard and decide to pull the engine, knowing almost nothing about it other than the...
Hello gents, new guy here wanting to confirm everything needed to conduct the Swap into my truck. I have a few bids on a 5.3 in my area and would...
I recently bought a 1998 k1500 the motor has a small knock so I pulled it and plan to rebuild. I also have a 2003 lq4 with about 3 grand worth of...
pulled the trigger on a 2001 lq4 over the weekend to swap into my 96 chevy k1500. i am still on the hunt for a 4l80e and manual T-Case to put behind...
I need help guys. I have a few questions regarding the splicing of the GMT400 to GMT800 harness. I could really use some help here guys, Im getting...
I'm doing this swap for someone else. I have a gen IV 5.3, all accessories, still need to get an intake, harness, and E38 ECM, but I'm doing more...
Hey guys! I'm new to the group! I currently have a 2008 GMC Sierra 1500 4x4 with a cammed 6.2L L94 and 6L80E Swap...I have been slowly acquiring the...
Just about ready to drop in the lq4 and I was planning on using the stock oil psi sensor in a block off plate for the oil cooler. I thought my...
Hello Everyone, New member on here and first post. But I am coming up short in my search and decided that it was time to ask for help. I am...
My intake is being smoothed out, and I do not want the throttle cable mounted ontop of the intake. Does anyone have pictures or ideas on where I...
What frame/motor mounts do I buy or need for this swap? Which bell housing do I swap out on my stock 4l60e trans. That came in the pickup to complete...
I've been poking around on the forum for awhile now and have found some great info. But I figured it was time to finally make a profile and try to...
I am not a fan of the stock 6.0 upper radiator hose crossing over the engine bay, so I was hoping to get a radiator with both of the connections on...
Can anyone give me me the straight up on what I need to mate my 4.8L to my 1996 trans in my k1500,,, it is a 4l60e automatic.... I was told that the...
So I think I'm going to start a new thread with what I've actually done and will be doing to my truck... Hopefully I can get some pic on here from my...
so im doing a 5.3 swap in a 95 K1500 and we were going to use the original 4l60e that was behind the original 4.3 v6 but im being told to change out...
I recently acquired a totaled 2013 ZL1 automatic from a friend(LSA engine/6l90 trans). What parts should I keep off of the car besides the...
Just finishing up my 5.3 with 4l60e swap in my 1990 Chevy Silverado. I ordered a PSi harness for the swap an everything was super easy to install...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules