Forum: Forced Induction

Gotta a reg cab 04 here. 408 stroker, all the goodies in it, tvs2300, cog on back, 10rib front setup. We got this truck in weeks ago and little...

Ok, I dont have a truck but since this motor comes in the trucks I figure this is the best site to get the info I am after. First off the car is a 92...

Well i almost have the entire project done and hopefully get some pics up,i went with a borg S376 and built everything else. But i am a little...

I'm kind of lost here......before the msd 2step system I can stall-boost about 1.2psi of the hole. Now I set the 2 step at 2500rpm and when I...

My issue is that I'm pushing oil though the rear seal of the turbo. I put about 50k on this turbo and didn't have any issue in till now. It started...

Im ready to get A intercooler for my vortech supercharger but i dont want to use vortech's air to water intercooler becuase of the price and would...

hi again i'm looking to buy a BOV , some ssy the Tial is one of the best, so when i searched i found that they have a diffrent springs like...

I have brand new forgen motor with around 1500 miles. Maybe I'm pushing it to soon. For the first time i pushed the dipstick out and it spayed oil...

If it Aint Blown it Sucks ! :LOL: Its time !!!! ... I will start to get pics this weekend of my clean up of my sloppy Rear mount Pig.... ...

Well, has anyone had a cam spec'd by PatrickG for a turbo 408 and willing to share the specs? If not I'll go ahead and order one for my setup.

Hi guys with meth.....It's time for me to step up and go with meth for playing in the streets when no 130octane gas is available. Since I run a SD...

Any recommendations for stainless exhaust on a cammed and Magnacharged 2009 6.0 Avalanche 4x4? I would like LT and exits behind both rear wheels. I...

I'm going to be installing a water to air intercooler to aid my vortec supercharger on my truck and I have a couple of questions. 1: Do I need to...

Does anyone have any pics of there oil drain setup from the turbo into the timing cover,i got the cover over off right now,im just not sure how to...

If you want to get into a forced induction system and your on a tight budget the Stage 1 kit is for you. This kit gets you on your way to being...

i usually do all my owe work but i don't know much about a turbo and i was being lazy i paid a shop to put my sts turbo kit on and when he got finish...

Just wanted to show you guys some of my Fab guys work out here in colorado. this is in a 05 2wd sss. its a "true" divided gt4202 setup with a 2 bar...

Almost forgot about this one.....LMAO... Enjoy. http://www.youtube.com/watch?v=5i7DSY5VtjU

Hey guys Ive got a P1SC procharger i am putting on a 2000 5.3 in my 94 rcsb. Anyone know how much cam I can get away with or a good boost cam? I...