Got a truck here that might be of some interest to most of you.
It's nothing radical, but it fits 80% of what you guys have.
Shanes Sierra 09
Last year the truck came in with much needed parts.
Has a DIY turbo kit w 76magnum. Stock 5.3 heads; Hmm
Got it going decent...
So here is what I have in the setup:
607HP and 638lb*ft @ 13lb boost
-5.3l bored to 5.7l (Thompson Motorsports)
-799 heads(LS6 head)...
for everyone to know what it was before i change things around :
5.3 bolt on + big cam , under 290hp ?
i was frustrated and a little bit...
338rwhp and 358rwtq :D it was on a dynojet though :(
what do you think, does it sound about right for this small cam?
I didn't really know...
Soo I dyno'd the turd at Tune Time Performance( around the corner from SLP Performance, in NJ) anyways the the truck made 364RWHP and 380RWTQ on a...
i have a 5.3 with bolt on and 231-239 617-621 113lsa stock heads and stock intake and a cluch fan .
now this numbers are taken on...
'00 Sierra, 408, MP78mm, NP turbo headers, 12psi, pump gas.
Holds boost nice and steady. Doesn't peak early or fall short on the topend.
Well guys I dyno'd my new setup yesterday, its a L76 6.0 with Ls3 heads and a healthy cam. I am very pleased with the numbers. Converter was locked...
This afternoon, my LBB laid down 446 hp, 401 ft lbs on the dyno. On motor. Still the 5.3.
Kevin's truck laid down some good numbers!
398.9hp and 394.9tq with just a NP Tune, no cats, magnaflow muffler. (stock cai/filter)
Put down 309 @ 6174 rpm with 280-290 tq. This was on a mail order tune on a Mustang dyno. Gonna be sending the logs to NP and see if they can find...
4l60 transgo shift kit and vette servo
Dynomax internal X Pipe dual 3" in dual...
Well guys she's ready from the 23rd, would like to give a thanks to Flaco for the re tune on THELSX, numbers were 569hp/508tq. See you all there.
So i get a phone call earlier today from Skeet saying he hit the rollers with a very respectable dyno number.
its a LQ9 with LS3 heads fast 102...
:chevy:I swapped out my totally lame 350 with TBI to an unbelievable 6.0 LSx engine and would do it again a thousand times over.
I am still not...
Ok its a stock 5.3 with a cam,arp studs,ls9 gaskets, a mp 76 with a .96, E85, and this was on 23#s of boost i think i am outta of turbo 828hp,921tq....
I got to put my truck on a dynojet dyno...
2000 sclb Z71
cold air intake, deleted cats, 3in single in-out...
I dyno'd my silverado with a only a muffler swap at a local speed shop. I posted this info in my newbie thread but I figured I'd add it here, where...
I have a 01 sierra c3 which is awd. I had a custom tune done to it. On my dyno data sheet its showing surging spikes on my curve for torque and hp. ...
This is my 6.2 crew cab dyno numbers
just dyno tuned it finally on tuesday
custom grind cam
THE FIRST ONE IS A VIDEO
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.