so ive put 2 inch drop shackles on the rear of my truck and its still not level how can i get a inch or 2 more drop? i got 26" rims so i dont want to go no more than 2 inches lower because they will rub... any ideas please?
so ive put 2 inch drop shackles on the rear of my truck and its still not level how can i get a inch or 2 more drop? i got 26" rims so i dont want to go no more than 2 inches lower because they will rub... any ideas please?
You could remove the over load springs on the leafs.. That will give you about 3/4's ofa inch. Only other way to get where you want is a set of lowering leafs, that might put you more then you want..
JOHN
Add about 500 pounds of solid weight in the Bed and that'll give you the 1 or so inch. otherwise remove the overload springs.
Drop hangers with the shackles you already have. If you decide you want it back up an inch use the second hole in the shackles instead of the first.
Donald just take the overload out. uve seen my truck and all i have is shackles and removed overload.
o and text me when u get a chance, i got a new phone and lost all my #'s
2006 extended cab, 6.0 swap, full bolt ons SOLD
2011 ECSB, 6.2, 6 spd, 3.73, 5" lift, 33" nitto, limo tint, debadged, volant CAI, muffler delete, black bear tune 14.0 @ 98 on the 33'sSOLD
2007 TBSS AWD, cam, stall, built trans, N2OSOLD
2006 RCSB cammed LQ9, full exhaust, 3200 stall, 2-4 drop
49 Ford F1
355 chevy / turbo 350 / 12 bolt posi / camaro subframed