VIDEOS PHOTO HOSTING FORUM RULES | 2009 LS1Truck Raceday at SAR
LS1Truck.com
Go Back   LS1Truck.com > Technical Discussion-GM Trucks > Appearance
Appearance Interior-Exterior
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-10-2004, 06:11 PM
LtDan LtDan is offline
Junior Member
 
Join Date: Nov 2004
Posts: 10
Ok guys I am new here. I will try my best to fit in. What I am looking for is some pictures of "Helo Guns" rims on a 2003 Silverado. I have a chance to get them pretty cheap and was wondering if anyone had any pictures with them on this type of truck. I thank all of you for your help.

p.s. If you have any other suggestions that would look good on my truck. Thx

Lt.Dan
Reply With Quote
  #2 (permalink)  
Old 11-10-2004, 06:31 PM
RedHeartbeat RedHeartbeat is offline
LS1Truck Moderator
 
Join Date: Nov 2003
Location: Denton Texas
Posts: 13,943
Welcome to the site. I wouldn't know them if I saw them.
__________________
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Reply With Quote
  #3 (permalink)  
Old 11-11-2004, 08:25 PM
kinjo1977 kinjo1977 is offline
Senior Member
 
Join Date: Mar 2004
Location: Springfield
Posts: 472
Send a message via MSN to kinjo1977
Quote:
Originally posted by LtDan@Nov 10 2004, 05:11 PM
Ok guys I am new here. I will try my best to fit in. What I am looking for is some pictures of "Helo Guns" rims on a 2003 Silverado. I have a chance to get them pretty cheap and was wondering if anyone had any pictures with them on this type of truck. I thank all of you for your help.

p.s. If you have any other suggestions that would look good on my truck. Thx

Lt.Dan
Not to be nosey. But what size do ya plan on getting?
16X9 or 17X9

And do ya plan on getting tires with them?
How much are you gonna be spending for 'em?

I can usually tell ya whether you are getting a good deal or not. Since I sell wheels all day long.

And yes, they are very nice wheels for someone who doesn't wanna do the big DUBS.
I haven't sold any for THAT particular truck, but I have put them on OBS Chevy and they looked great.

Let me know if I can help,

Ron

P.S. Suggestions: Steel Cowl Hood, Roll pan, a new grille, maybe a 15% tint and debadge the truck. Your truck will look a lot better and you could do it all for about $800. (Depending on how much you pay to paint the hood)
Also, you could just save your cash and put a STS turbo on it, I would rather have that than any exterior mods.
__________________
FOR ALL YOUR WHEEL, TIRE, AND ACCESSORY NEEDS
CONTACT: EPLEY'S TOUCH OF CLASSIC 1-270-843-6892
OR TO GET ME PERSONALLY CALL: 1-615-943-6514



2000 Chevy Silverado 4.8L RCSB: smoked UPD, Flowmaster exhaust, De-screened MAF, Nelson 93 hot tune. Upcoming installs: trans-go shift kit, Eaton posi, billet servo, ported and polished throttle body...Near future: 6.0/4L80E install with 150 wet shot
Reply With Quote
  #4 (permalink)  
Old 11-15-2004, 12:57 AM
LtDan LtDan is offline
Junior Member
 
Join Date: Nov 2004
Posts: 10
Quote:
Originally posted by kinjo1977+Nov 11 2004, 07:25 PM--><div class='quotetop'>QUOTE(kinjo1977 @ Nov 11 2004, 07:25 PM)</div>
Quote:
<!--QuoteBegin-LtDan
Quote:
@Nov 10 2004, 05:11 PM
Ok guys I am new here. I will try my best to fit in. What I am looking for is some pictures of "Helo Guns" rims on a 2003 Silverado. I have a chance to get them pretty cheap and was wondering if anyone had any pictures with them on this type of truck. I thank all of you for your help.

p.s. If you have any other suggestions that would look good on my truck. Thx

Lt.Dan
Not to be nosey. But what size do ya plan on getting?
16X9 or 17X9

And do ya plan on getting tires with them?
How much are you gonna be spending for 'em?

I can usually tell ya whether you are getting a good deal or not. Since I sell wheels all day long.

And yes, they are very nice wheels for someone who doesn't wanna do the big DUBS.
I haven't sold any for THAT particular truck, but I have put them on OBS Chevy and they looked great.

Let me know if I can help,

Ron

P.S. Suggestions: Steel Cowl Hood, Roll pan, a new grille, maybe a 15% tint and debadge the truck. Your truck will look a lot better and you could do it all for about $800. (Depending on how much you pay to paint the hood)
Also, you could just save your cash and put a STS turbo on it, I would rather have that than any exterior mods. [/b]
The ones that I can get are 17x9. They are actually for my brothers truck which is almost exactly like mine. I can get them for 700 flat. It may not be that good of a deal I am not sure but found them online for 800 and up without including shipping. Thanks for the suggestions. Already have a new grill, tint...the roll pan isn't feasible at this time as he and I use our trucks a lot to hall ****....but as for the cowl hood how much do you think I can get one for? I have recently gotten hail damage where I got about 20 -30 dings on the hood. Also what brand? Thanks for your help.

Lt. Dan
Reply With Quote
  #5 (permalink)  
Old 11-15-2004, 10:15 AM
kinjo1977 kinjo1977 is offline
Senior Member
 
Join Date: Mar 2004
Location: Springfield
Posts: 472
Send a message via MSN to kinjo1977
Quote:
Originally posted by LtDan@Nov 14 2004, 11:57 PM
The ones that I can get are 17x9. They are actually for my brothers truck which is almost exactly like mine. I can get them for 700 flat. It may not be that good of a deal I am not sure but found them online for 800 and up without including shipping. Thanks for the suggestions. Already have a new grill, tint...the roll pan isn't feasible at this time as he and I use our trucks a lot to hall ****....but as for the cowl hood how much do you think I can get one for? I have recently gotten hail damage where I got about 20 -30 dings on the hood. Also what brand? Thanks for your help.

Lt. Dan
If you are paying 700 flat (which includes shipping) then you are getting a good deal. That would be almost right at what I would charge.

Now as far as the steel cowl goes for a 2003. I will have to check. I know I sell them for 99-2002 trucks for $350+shipping. But I expect these brand new 03-04 trucks would cost a bit more, maybe around $400+shipping.
__________________
FOR ALL YOUR WHEEL, TIRE, AND ACCESSORY NEEDS
CONTACT: EPLEY'S TOUCH OF CLASSIC 1-270-843-6892
OR TO GET ME PERSONALLY CALL: 1-615-943-6514



2000 Chevy Silverado 4.8L RCSB: smoked UPD, Flowmaster exhaust, De-screened MAF, Nelson 93 hot tune. Upcoming installs: trans-go shift kit, Eaton posi, billet servo, ported and polished throttle body...Near future: 6.0/4L80E install with 150 wet shot
Reply With Quote
Reply

Go Back   LS1Truck.com > Technical Discussion-GM Trucks > Appearance

« Previous Thread | Next Thread »

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 12:03 PM.


Copyright 2002-2007 LS1Truck.com

Search Engine Friendly URLs by vBSEO 3.0.0