bamachevy15 - Photobucket - Video and Image Hosting
Is there anyway to take the letters chevrolet off my tailgate without leaving any marks or messing the paint up?
bamachevy15 - Photobucket - Video and Image Hosting
Is there anyway to take the letters chevrolet off my tailgate without leaving any marks or messing the paint up?
03 RCSB,4.10s,LTs,True Dual Magnaflows, CAI, EFILive, 10K HIDS
heat gun, wire, and a good buffer. Or you can take it to a body shop and pay them a few bones to do it. That way if it gets messed up, they have to fix it.
I did mine with nothing but a hair dryer and a bottle of Nu Finish to polish it. Once you heat up a part of it you can peel it off like electrical tape.
'00 Silverado 4.8L (Gone)
'11 Silverado 4.8L
Originally Posted by RUFFNECK
I bought a flip kit and let Red03SilSS redo my whole tailgate. You should do the same thing with the entire tailgate. Its clean as hell
1951 3100
1984 C10
its just vinyl....it peels right off
2006 silverado SS....Clifford Jr...turbo coming soon
1970 Chevelle ly6 swap....d1 coming soon
I peeled mine off in the cold so the vinyl wouldnt leave alot of sticky residue left. Then I took some 3M adhesive remover and a shop rag to get what was left on the truck off.
2007 Chevy Silverado Classic 4.3L V6
Magnaflow Muffler, CFM Technologies CNC Machined High Flow Vortec Throttle Blades, STS Rear Turbo, Intercooler, Accell Distributor and Coil, 8mm wire, Autolite Platinum plugs, Runs out of fuel at 4000RPM. Marine intake with larger injectors soon. Hoping to squeeze 10psi.
yeah peeling it off in the cold it tends to break apart and not come off in one piece...if you do it in the cold i suggest using a hair dryer to help you out a little
2006 silverado SS....Clifford Jr...turbo coming soon
1970 Chevelle ly6 swap....d1 coming soon
Use a 4 inch angle grinder with a big steel brush!...that'll get r done!......
OH.....you dont want to hurt the paint....LOL
Vortec Performance Tuned
LQ9 built 4L60 LTs and a billion miles on the speedo!
Might as well get a 12 gauge and shoot it! Go big or go home!
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
Just take a heat gun(or hair dryer) and peel it off. If it leaves any residue get some googone or 3m adhesive remover
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
Posting Permissions
Reply With Quote
