4l60e to 4l80e plus 4x4 tcase upgrade

  1. a picture of the 4l80e after the istallation and test drive. found a oil leak it seems to be the pressure sensor atop the engine. that will be a hard...
  2. another picture of the crossmenber showing the on going modification for the 4x4 canversion. the drivers side will be cut down to allow for the front...
  3. modified factory transmision cross member. with new trans mount off rear and center hump for the 4l60e tail shaft mount cut down to clear the new...
  4. a look at the 4l80e before the cossover pipe, exahaust and shift cable.
  5. factory 4l80e tranny cooler lines for a 2005 chevy silverado 1500hd with 6.0 engine. it does not require any cutting of the factory lines. makes for...
  6. Photo0134
  7. Photo0133
  8. new driveshaft and carrier modified to fit behind the 4x4 tcase and still. the front side shortened to 15in. and the rear shaft lenghtened to allow...
  9. this is a picture o f the 4l65e that i had rebuilt about 1,000 before I burnt in a street race nedles to say I lost the race.
  10. blow 2nd and overdrive 4l65e befor the removal
  11. lower bell housing
  12. 2500hd 6.0 flywheel
  13. new ecm tunned by nelson performance. plug and play. it comes with all the instruction you need.
  14. nelson performance 4l60e to 4l80e swap harness. works great.
  15. Photo0084
  16. Photo0037
Showing pictures 1 to 16 of 16