08-21-2008, 12:18 PM
|
 |
Senior Member
|
|
Join Date: May 2004
Posts: 2,024
|
|
What DTC codes are you getting? For the engine not to start there has to be something when you scan it. You have to get signal from the CMP and CKP for it to start. If the engine cranks and turns I would look at these 2 sensors first becasue the PCM triggers the coil by grounding the appropriate IC circuit using information from the crankshaft position (CKP) and camshaft position (CMP) sensors.
- Low reference
- Chassis ground
- Ignition 1 voltage
- The appropriate IC circuit
__________________
 97 GMC, 2002 LS6, MTI G1 cam 228/232-588/575-113, MTI hardened pushrods, Patriot 243 Heads w/dual gold springs, 85mm Mass air, S&P, 3" Random Technology Metal-Matrix cats, Flowmasters, HPTuners, 3200 stall, 4.10 gears, Original Boyds wheels 17X9's front 17X11's rear, East coast customs WS6 ram air hood, 150 shot NOS LS1 set up, 4/5Beltech drop, Caltracs
|