LS1Truck.com - View Single Post

Turbo6.0L · #10 (**permalink**) 12-06-2007, 04:41 PM

Quote:

Originally Posted by farmtruc

The kit looks like it would work great! I bet it makes the same power as the current one. Actually, it's hard to mess up a turbo kit and not make power.

From what I see on a regular basis, the pipe under the cross member might be too low, we get a lot of trucks that come in lowered and have a lot of scrapes on the crossmember.
The filter is definitely going to get wet, that'll be an issue with the maf of course. Typical of any remote mount turbo.

Did you conceal the feedline and return line that good or are they not installed?
If not, those are going to hang a little bit too.
Don't worry about the drain line being in the 6 o'clock position so it will drain correctly, mine drains just fine and you can see how horizontal it is.

The cold pipe under the truck I think we have a fix for. But all things cost, so really lowered guys will pay a slightly higher price.

for this one.
or we offer a hi front mount.
And why do lowered trucks drag so much are they in the weeds.
The air filter again there is a mod but at a cost. This set up is aiming towards a budget type of turbo system, with good parts.
Yea the oil lines are not ran yet, still working on it as a total set up., the oil drain will not stick any lower then the turbo does not.

good to know I can tweek that around if need be.
HP level probably the same for sure.

more pics to come.