|
The kit looks like it would work great! I bet it makes the same power as the current one. Actually, it's hard to mess up a turbo kit and not make power.
From what I see on a regular basis, the pipe under the cross member might be too low, we get a lot of trucks that come in lowered and have a lot of scrapes on the crossmember.
The filter is definitely going to get wet, that'll be an issue with the maf of course. Typical of any remote mount turbo.
Did you conceal the feedline and return line that good or are they not installed?
If not, those are going to hang a little bit too.
Don't worry about the drain line being in the 6 o'clock position so it will drain correctly, mine drains just fine and you can see how horizontal it is.
|